JBL BassPro Micro Subwoofer
JBL BassPro Micro Subwoofer
JBL BassPro Micro Subwoofer
JBL BassPro Micro Subwoofer

JBL BassPro Micro Subwoofer

$ Liên hệ
102 Review(s)

Bảo hành : 2 năm tất cả sản phẩm
  • Tồn kho :
  • Hàng luôn có sẵn
Category : LOA SUBWOOFER

Share this on:

JBL BassPro Micro Subwoofer
JBL BassPro Micro Subwoofer
JBL BassPro Micro Subwoofer

Increase the Space and Boost the Bass with the JBL BassPro Micro


JBL creates a new dockable bass solution with BassPro Micro. This ultra-compact powered
subwoofer system achieves jaw-dropping bass performance that is hard to believe for its
size. The 140-watt RMS Class D amplifier and proprietary subwoofer combination delivers
100dB at 10 feet! The subwoofer enclosure is docked to the permanent amplifier base but
detaches in just seconds providing extra cargo space when needed. The BassPro Micro
includes speaker-level and line-level inputs that easily connect to the car’s existing audio
system. There are also controls for input sensitivity, crossover frequency, phase and a bass
EQ with 9dB of boost. The BassPro Micro’s efficient and streamlined design makes it an ideal
upgrade for any car’s audio system. If you are hungry for even more bass, you can daisy
chain two units together to deliver real thunder.
 

Features and Benefits


Sleek Appearance and Smart Design

With durable grill fabrics, satin chrome trim and matte black finish for the enclosure case, the BassPro Micro
looks as good as it sounds. You’ll probably be giving your friends a good look at what sounds so good.


Quick Release

The BassPro Micro is designed to quickly unlatch via a quick release bracket and detach from the amplifier
unit that serves as the permanently installed base in the vehicle. Removal of the bass enclosure provides
bonus cargo room when needed.


Built-in 140 watt RMS Class D amplifier

The amplifier provides matched electronics and is optimized for BassPro Micro subwoofer characteristics
and enclosure acoustics. Class D operation also means the amplifier runs cooler and draws less current from
the vehicle electrical system.


High- and Low-level Inputs

The BassPro Micro system is designed to be compatible with nearly every type of car audio system. It has
speaker-level inputs for factory OEM systems or RCA line-level inputs for high-end aftermarket systems.
BassPro Micro also has four channel high level inputs to ensure non-fading bass.


Audio Detect and Remote In

The BassPro Micro has an audio detect circuit that allows the subwoofer to turn-on and timeout to standby
mode. Timeout mode is fixed at 3 minutes. (The system has a relatively slow time constant to avoid
unintentional turn-on.) An automatic audio sense circuit turns the amplifier on whenever it detects an audio
signal. There is a switch to disable audio sense when use of a remote turn-on wire is preferred.


Daisy Chain Connection

For an even more dramatic bass enhancement, two BassPro Micros can be daisy chained together by simply
using standard 3.5 interconnects. There is no need to run additional wiring.


Input sensitivity, Crossover Frequency, Bass EQ and Phase adjustments

There is an array of controls that give you the ability to fine-tune BassPro Micro’s performance based on
vehicle type, placement and taste: The input sensitivity control allows you to set maximum system signal
without excessive clipping or distorted bass response. The crossover frequency control enables you to dial-in
the correct frequency for your vehicle. The bass EQ control can boost your bass response by as much as
9dB. The phase switch allows you to get proper phase alignment between the subwoofer and main speakers
regardless of speaker location in the vehicle. The overall result is distortion-free low-frequency response for
all types of music.
 

Đánh giá sản phẩm

What’s in the Box


BassPro Micro Subwoofer enclosure
BassPro Micro Amplifier base
Hardware for attachment to vehicle
QSG
2 RCA adapters


Technical Specifications

Driver Complement: 8"(200mm) Woofer
Amplifier Power: 140W RMS
Frequency Response: 35Hz – 120Hz
Fuse: 15A
Maximum Current Draw: 14.5A
Quiescent Current Draw: <800mA
Input Sensitivity: 0.05V – 2.0V Low-Level
Input; 0.5V – 20V High-Level Input
Crossover Frequency: 50Hz – 120Hz
Crossover Slope: 12dB/octave
Bass Boost: 0dB to + 9dB @ 65Hz
Dimensions (L x W x H): 16-3/16" x 7" x
10-7/8" (411mm x 177mm x 275mm)
 

image
image
image
image
image
image
image